10.2021 / All Regions / 1 DVD & 8 DVD-DL / Windows 10, Windows 8, Windows 7 / 32 & 64 bit
Cummins Incal October 2021 ECM calibation files (for Cummins Insite v.8.7)
+ RMI Repair and Maintenance Information + SIR Service Information Regulation
Incal DVD1 contains calibrations for Automotive applications. DVD2 contains calibrations for Industrial applications. DVD3 contains calibrations for HHP/Power Gen applications. DVD4 contains calibrations for Automotive applications. DVD5 contains calibrations for Automotive and Industrial applications, Programmable Datalink devices, and additional files. DVD6 contains calibrations for Automotive applications.
With Cummins Insite diagnose and troubleshoot engine problems, store and analyze information about an engine, modify an engine parameters.
Changes and new features Insite:
-Turbocharger Actuator – Calibration download only.
-The Features and Parameters and Data Monitor/Logger column widths will remain the same between INSITE sessions.
-The Out of Range window in Data Monitor/Logger has been removed.
-The Upper and Lower limit columns have been modified to display the Minimum
Measured and Maximum Measured values read by INSITE while the parameters are being monitored.
-A performance improvement has been implemented for reading calibrations on network drives.
-The INTELECT folder now contains an INSITE Engine Feature file. The individual
engine help files have been eliminated. The INSITE Engine Feature file lists the help
descriptions for the engines Features and Parameters, Diagnostic Test and Advanced
ECM Data help content.
-The Audit Trail has been expanded to support up to 8 Audit Trail entries, if supported by the calibration.
-The Calibration Selection has been redesigned to include a separate section for
Programmable Datalink Device (PDD) Calibrations such as the Aftertreatment Device or
Turbocharger Actuator. This will allow users to bypass connecting to the ECM and download directly to a PDD.
-INSITE will only display Advanced ECM Data features and ECM Diagnostic Tests if they are supported by the calibration.
-The ECM Key Off Time has been increased for certain functions in the tool.
-A print preview of a template has been added to the right-click menu in Work Orders.
Note: HTML is not translated!